| WeChat: +86.13328318872 | Home | InSite Search | About Us | Contact Us |
|
|
|
|
|
|
||||
|
Functions of Panels of Automatic Injection Blow Molding Plastic Machinery
|
| 5.5.2 Functions of the panels The manual operation panel(shown in Fig.11) on the frame and the display operation panel(shown in Fig.12) on electrical control chest are provided. 5.5.2.1 Manual operation panels(shown in Fig.11) (01) Indicating lamp for the blow mould opening (02) Indicating lamp for the blow mould closing (03) Blow mould opening button (04) Blow mould closing button (05) Injection indication lamp (06) Indication lamp for the keeping pressure keep (07) Injection button (08) Keeping pressure button (09) Indicating lamp for the screw back (10) Indicating lamp for the plastic melting (11) Screw back button (12) Plastic melting button (13) Indicating lamp for the screw mould up quickly (14) Indicating lamp for screw mould up slowly (15) Indicating lamp for the screw mould up quickly (16) Indicating lamp for the screw mould up slowly (17) Standby (18) Indicating lamp for the screw mould down (19) Standby (20) Screw mould down button (21) Indicating lamp for the products sideslip by air cylinder (22) Indicating lamp for unrod air cylinder in and out (23) Button for the products sideslip (24) Button for the unrod air cylinder in and out (25) Indicating lamp for the air blowing (26) Indicating lamp for the air exhausting (27) Air blowing button (28) Air exhausting button (29) Indicating lamp for the core-in (30) Indicating lamp for the core-out (31) Core-in button (32) Core-out button |
| Copyright © Pimpex@RPM Since 2002 www.gzqlh.com Sitemap XIAMEN RPM IMP.&EXP. CO.,LTD. |
